CRG01,crg02 2002-08-29 1 toshiba rectifier silicon diffused type CRG01, crg02 general purpose rectifier applications average forward current: i f (av) = 0.7 a repetitive peak reverse voltage: v rrm = 100, 400 v suitable for compact assembly due to small surface-mount package ?s ? flat tm ? (toshiba package name) maximum ratings (ta 25c) characteristics symbol rating unit CRG01 100 repetitive peak reverse voltage crg02 v rrm 400 v average forward current i f(av) 0.7 a 15 (50 hz) peak one cycle surge forward current (non-repetitive) i fsm 16.5 (60 hz) a junction temperature t j 40~150 c storage temperature t stg 40~150 c electrical characteristics (ta 25c) characteristics symbol test condition typ. max unit v fm (1) i fm 0.1 a 0.88 v fm (2) i fm 0.7 a 1.1 peak forward voltage v fm (3) i fm 1.0 a 1.1 v repetitive peak reverse current i rrm v rrm rated 10 a device mounted on a ceramic board (soldering land: 2 mm 2 mm) 65 thermal resistance r th (j-a) device mounted on a glass-epoxy board (soldering land: 6 mm 6 mm) 130 c/w unit: mm jedec D jeita D toshiba 3-2a1a weight: 0.013 g (typ.)
CRG01,crg02 2002-08-29 2 marking following indicates the date of manufacture type code CRG01 g1 crg02 g2 standard soldering pad 2.8 1.2 1.2 unit: mm 0 1 2 3 4 5 6 7 8 9 cathode mark type code lot no. month of manufac- ture january to december are denoted by letter a to l respectivel y . year of manufac- ture last decimal digit of the year of manufacture
CRG01,crg02 2002-08-29 3 average forward current i f (av) (a) ta m ax ? i f (av) maximum allowable temperature ta m a x ( c ) time t (s) r th (j-a) ? t transient thermal impedance r th (j-a) (c/w) number of cycles surge forward current (non-repetitive) peak surge forward current i fsm (a) 0.4 0.8 0.1 1 10 1.2 1.6 2.0 2.4 2.8 25c t j 150c (2) (1) (1) device mounted on a ceramic board: soldering land: 2 mm 2 mm (2) device mounted on a glass-epoxy board: soldering land: 6 mm 6 mm 1 10 1000 10000 0.001 0.01 0.1 100 1 10 100 instantaneous forward voltage v f (v) i f ? v f instantaneous forward current i f (a) 160 60 0 20 40 80 100 120 140 0.2 0 0.4 0.6 1.0 0.8 device mounted on a ceramic board device mounted on a glass-epoxy board 1 100 10 0 10 20 30 25 5 15 ta 25c f 50 hz half sine waveform device mounted on a ceramic board device mounted on a glass-epoxy board soldering land board size board 2 mm 6 mm 50 mm 50 mm 0.64 t 1.6 t
CRG01,crg02 2002-08-29 4 toshiba is continually working to improve the quality and reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba corporation for any infringements of intellectual property or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any intellectual property or other rights of toshiba corporation or others. the information contained herein is subject to change without notice. 000707ea a restrictions on product use
|
